تابعنا |

توربينات الرياح 9.xMW بولاند

توربينات الرياح 9.xMW بولاند

In response to the national policy of planning and constructing large wind power PV bases in the “desert,gobi and wilderness”,CRRC Zhuzhou launched the customized high-power WTGS for “desert,gobi and wilderness”,and formulated the environmental adaptability scheme for the WTGS used in “desert,gobi and wilderness”according to the local characteristics of abundant wind resource,large base scale,obvious environmental characteristics and main transmission of electricity to outside.The WTGS inherits the excellent features of alpine sand resistance and highland locomotive.CRRC Zhuzhou completed a number of key innovative technology research and breakthroughs,and launched the 9.xMWD125 WTGS platform according to the specific consumption scenarios to help the construction of the ecological chain and make the desert,gobi and wildness “green”.

Main performance and characteristics

Scheme of large rotor and high-power WTGS

Take full advantage of the favorable condition such as abundant wind resources,flat terrain and ease of establishing large-scale bases in desert areas:

1.Adopt extra-large wind rotor diameters to increase the increase annual equivalent power generation hours;

2.Adopt a large WTGS capacity to reduce the project cost.

Customized design of desert blades

1.In aerodynamic design,considering the influence of sand erosion on the aerodynamic performance of blades,the airfoil with low rough sensitivity was selected to ensure the stability of the aerodynamic performance of blades.

2.In the structural design,the leading edge protective film against sand erosion and corresponding maintenance measures are considered,and the blade leading edge protective device is designed specifically to improve the blade’s ability to resist sand erosion;

3.In the material selection,UV-resistant surface coating materials are selected to ensure the aerodynamic performance of the blade.

Desertification design to enhance environmental adaptability

1.According to the high-temperature phenomenon in desert,gobi and wilderness,the heat dissipation capacity of the electric control cabinet,generator,gearbox and other components is designed specifically;

2.Through the integrated design of the transmission chain to improve the tightness and reliability of the WTGS and reduces the wear and tear of components caused by dust and other impurities;

3.The design of three-level converter technology and box-type transformer upper-mounted scheme reduces cable loss and the impact of sand wind;

4.Based on the big data collaborative control platform,early warning of sandstorms is realized to improve the operation and maintenance efficiency of wind farms.

فيما يلي جميع المعلومات التي تهتم بها بشأن مشروع مزرعة الرياح

ألق نظرة على وصف المنتجات أدناه ، إذا كان لا يزال لديك سؤال ، فلا تتردد في الاتصال بنا عبر البريد الإلكتروني أو whatsapp.

Why Boland/CRRC Is Your Best Manufacturer Of 9.xMW Unit Wind Turbine Generator?

(1) لدينا سلسلة صناعية كاملة من المكونات الأساسية مثل المولد ، والشفرة ، والبرج ، وعلبة التروس ، والمحول ، والمكثف الفائق ، ونظام الملعب ، لإكمال تصنيع الماكينة والتشغيل والصيانة الذكية
(2)World top 500 enterprise
(3) قدرة حل نظام دورة الحياة الكاملة لمشروع طاقة الرياح ، بما في ذلك تطوير الموارد ، وتصنيع الماكينة بالكامل ، و EPC للمشروع ، والتشغيل الذكي والصيانة
[4) في الوقت الحاضر ، احتلت مبيعات مولدات توربينات الرياح المرتبة الأولى في الصين ، واحتلت مبيعات الشفرات المرتبة الثانية في الصين ، واحتلت مبيعات الأبراج المرتبة الثالثة في الصين.
(5) يوجد فريق هندسي وتقني محترف وفريق هندسي وفني يضم أكثر من 6600 شخص.
(6) أنظمة الطاقة المتكاملة ، بناءً على المنتجات الناضجة ، والاعتماد على منصة تكامل الأنظمة المتقدمة ، لإنشاء حلول شاملة لنظام الطاقة لسيناريوهات مختلفة

Main Technical Parameters

Product model 9.xMW215
Rated power 9100KW
Design air density 1.15kg/m³
Power control mode Variable speed pitch regulated
Cut-in wind speed 3 م / ث
Static design rated wind speed 10m/s
Cut-out wind speed 25m/s
سرعة الرياح البقاء على قيد الحياة 52.5 م / ث
Wind turbine grade IEC S
Service life 20years
Surv ival ambient temperature -40℃~50℃
Operating ambient temperature -30℃~40℃
Rotor diameter 215m
Hub height customize
Adaptable altitude 0-3000m

لماذا طاقة الرياح قابلة للتجديد؟

طاقة الرياح هي تحويل طاقة الرياح الحركية إلى طاقة حركية ميكانيكية ، ثم الطاقة الميكانيكية إلى طاقة حركية كهربائية ، وهي توليد طاقة الرياح. مبدأ توليد طاقة الرياح هو استخدام الرياح لدفع شفرات طاحونة الهواء للدوران ، ثم زيادة سرعة الدوران من خلال زيادة السرعة لدفع المولد لتوليد الكهرباء.

الرياح هي أحد مصادر الطاقة التي ليس لها مخاطر عامة. وهو لا ينضب. بالنسبة للجزر الساحلية والأراضي العشبية والمراعي والمناطق الجبلية والهضاب حيث تندر المياه والوقود وصعوبة النقل ، فهي مناسبة جدًا لاستخدام توليد طاقة الرياح وفقًا للظروف المحلية. وطاقة الرياح لا تحتاج إلى وقود ولا تنتج إشعاعًا أو تلوثًا للهواء.

كمصدر للطاقة النظيفة والمتجددة ، تحظى طاقة الرياح باهتمام متزايد من البلدان حول العالم. كمية طاقة الرياح في العالم ضخمة ، حوالي 2.74 × 10 ^ 9MW ، منها 2 × 10 ^ 7MW متوفرة ، وهي أكبر 10 مرات من الكمية الإجمالية للطاقة المائية المتوفرة على الأرض. طاقة الرياح ضخمة جدًا لدرجة أن الطاقة التي يتم الحصول عليها عن طريق حرق الفحم في العالم كل عام لا تزيد عن ثلث الطاقة التي توفرها الرياح في عام واحد.

ما هي شروط اختيار موقع مزرعة الرياح وكيف نستعيدها؟

Basic conditions for wind farm construction
1.first we need get the region's perennial wind source information, the annual average wind speed at the height of the wind turbine should not be less than 6m / s.
2.topography (preferably higher or closer to, for example, the sea).
3.laying the grid conditions, extreme weather conditions, local electricity price, etc.
4- يجب أن تكون المساحة كبيرة بحيث لا تقل عن بضعة كيلومترات مربعة أو أكثر.
5. إنشاء برج قياس الرياح ، وقياس بيانات موارد الرياح لأكثر من عام ، وهذا يتطلب مساعدة الإدارات المحلية ذات الصلة.

كيفية الحصول على بيانات موارد الرياح
يشير مصطلح "الرياح" إلى الحركة الأفقية للغلاف الجوي ، في اتجاه حركة الرياح تهب دائمًا من الضغط العالي إلى الضغط المنخفض ، والمصدر النهائي لطاقة الرياح هو طاقة الإشعاع الشمسي ، وبعض المناطق على الأرض غنية جدًا بموارد طاقة الرياح ، مثل حزام الرياح بخط العرض المنخفض وحزام الرياح الغربي السائد ومناطق التحكم في حزام الرياح القطبية الشرقية ، وغالبًا ما تكون موارد طاقة الرياح غنية جدًا.
الاعتماد على الفريق المحترف في مجال موارد الرياح لجمع بيانات محطة الطقس على المدى الطويل ، والبيانات متوسطة الحجم (MERRA ، AWS ، Vortex ، وما إلى ذلك) وبيانات قياس الرياح من مشاريع طاقة الرياح المحيطة بالقرب من المنطقة المقصودة ، وتحليل الرياح المحتملة موارد الطاقة في المنطقة المقصودة ، وجمع البيانات الطبوغرافية للنمذجة ،
اجمع بيانات الأرصاد الجوية لمحاكاة مجال التدفق ، وارسم خريطة توزيع موارد طاقة الرياح للمنطقة المقصودة ، وحدد مناطق ذات توزيع وبناء أفضل لموارد طاقة الرياح. موقع.

خدمة Boland / CRRC
Customers can provide site coordinates,Boland/CRRC provides free wind resource measurement and site resource assessment services to estimate wind farm power generation from site-specific power generation
يمكن إرسال إحداثيات محددة إلى marketing@boland-hydroturbine.com أو Whatsapp +86 13923745989

ما الذي يمكن أن يفعله Boland / CRRC لمحطة طاقة الرياح الخاصة بك؟ 

مجموعة خدمات بولند ونماذج التعاون

EM:  provide wind & solar & energy storage projects equipments

Wind part:we can provide Generator, wind turbine blade, tower barrel, gear box, converter, super capacitor, variable paddle system and other core components, complete machine manufacturing

Solar part:we can provide PV panel,inverter

Energy storage part:we can provide Container ,Battery & BMS System ,PCS System ,EMS Management System ,Fire control system, temperature control system, access control and lighting system

خدمة EPC: مقاول EPC مشروع طاقة الرياح والطاقة الشمسية وتخزين الطاقة.

يتمتع Boland / CRRC بمؤهلات عليا في EPC ، ويتعهد بالتصميم والمشتريات والبناء وخدمات التكليف للمشروع ، ويتحمل المسؤولية الكاملة عن الجودة والسلامة والجدول الزمني وتكلفة الأعمال المتعاقد عليها.

التعاون المالي: محطات توليد الطاقة في التشغيل والصيانة ، التمويل ، الاستحواذ.

Boland / CRRC للتعاون في المشروع يمكن أن تقوم بخدمة التشغيل والصيانة. الاستثمار في المشروع والاستحواذ على حصة كبيرة أو الحصول على المشروع بأكمله.

Boland/CRRC 9.x MW Series Wind Turbine Advantage.

1) 9.xMW Series Wind Turbine For Biggest Electrical Generate With Lowest Cost
1.Use of large-capacity units can reduce the use of land resources
2.Reduce the cost of power plants and save investment costs
3.High unit efficiency, high thermal efficiency
4.Reduce power plant operating costs and improve economic efficiency
5.Can reduce the number of installed units and facilitate centralized control and management
6.Accelerate the speed of power construction and adapt to the rapidly growing load requirements.
2 ، دراسة تقرير جدوى مزرعة الرياح واقتراح تصميم توربينات الرياح
يمكن أن تساعد Boland / CRRC في إنتاج تقارير الجدوى ومقترحات تصميم المشروع ,
يحتاج العملاء إلى تقديم المعلومات التالية:
1. اسم المشروع والقدرة
2- إحداثيات الموقع
3- الخريطة الطبوغرافية
4- تقرير استكشاف البر
5.مسافة نقطة الوصول إلى المحطة الفرعية (تعريفة التغذية ومعرفة هامش تحميل المحطة الفرعية المحلية)
3)Scheme of large rotor and high-power WTGS
Take full advantage of the favorable condition such as abundant wind resources,flat terrain and ease of establishing large-scale bases in desert areas:
1.Adopt extra-large wind rotor diameters to increase the increase annual equivalent power generation hours;
2.Adopt a large WTGS capacity to reduce the project cost.

4)Customized design of desert blades
1.In aerodynamic design,considering the influence of sand erosion on the aerodynamic performance of blades,the airfoil with low rough sensitivity was selected to ensure the stability of the aerodynamic performance of blades.
2.In the structural design,the leading edge protective film against sand erosion and corresponding maintenance measures are considered,and the blade leading edge protective device is designed specifically to improve the blade’s ability to resist sand erosion;
3.In the material selection,UV-resistant surface coating materials are selected to ensure the aerodynamic performance of the blade.
5)Desertification design to enhance environmental adaptability
1.According to the high-temperature phenomenon in desert,gobi and wilderness,the heat dissipation capacity of the electric control cabinet,generator,gearbox and other components is designed specifically;
2.Through the integrated design of the transmission chain to improve the tightness and reliability of the WTGS and reduces the wear and tear of components caused by dust and other impurities;
3.The design of three-level converter technology and box-type transformer upper-mounted scheme reduces cable loss and the impact of sand wind;
4.Based on the big data collaborative control platform,early warning of sandstorms is realized to improve the operation and maintenance efficiency of wind farms.
6) استكمال سلسلة التوريد الداخلية في Boland / CRRC
Boland / CRRC لديها سلسلة صناعية كاملة من المكونات الأساسية مثل المولد ، والشفرة ، والبرج ، وعلبة التروس ، والمحول ، والمكثف الفائق ، ونظام الملعب ، لإكمال تصنيع الماكينة والتشغيل الذكي والصيانة.
بالنسبة لدورة الحياة الكاملة لمنتجات طاقة الرياح ، تم إنشاء ستة منصات تقنية (حلول النظام ، والتوربينات الذكية ، والصديقة للشبكة ، والرقمنة ، والاختبار والتحقق من خدمات التشغيل والصيانة الذكية) طوال دورة حياة منتجات طاقة الرياح لتوفيرها عملاء مع حلول نظام شاملة لخدمات الطاقة الجديدة.

قطار صناعة طاقة الرياح
قطار صناعة طاقة الرياح
wind turbine industry train
wind turbine industry train
wind turbine industry train
wind turbine industry train

7) Integrated Energy Wind Power System

شكلت صناعة طاقة الرياح CRRC سلسلة صناعية كاملة نسبيًا من الرقائق والأجهزة والمكونات إلى الآلات الكاملة ، من الإنشاءات الجديدة إلى التشغيل والصيانة. إنها واحدة من شركات التصنيع المهمة في صناعة طاقة الرياح المحلية ، وقد تم تجهيز أكثر من 60% من الآلات الكاملة لطاقة الرياح المحلية بمنتجات مصنوعة من قبل CRRC.

8)Highly Educated Engineering And Technical Team

يوجد فريق هندسي وتقني محترف وفريق هندسي وتقني يضم أكثر من 6600.1 أكاديمي من الأكاديمية الصينية للهندسة 209 من كبار المهندسين الاستاذين وأكثر من 240 درجة دكتوراه وأكثر من 3100 ماجستير.

فريق بولاند CRRC

9) Wind Turbine Installation And Commissioning Service

Boland/CRRC provides installation and commissioning services, after the purchase of the fan we will have a professional team to guide the installation.

9.xMW Series Wind Turbine Generator Application 

(1)Suitable for “desert,gobi and wilderness”
(2)Desertification design to enhance environmental adaptability.The design of desertification environment adaptability enhances the adaptability of the WTGS to corrosion,high temperature,sandstorm and ultraviolet light.
(3)Wind independent power generation. That means the wind turbine output power through the battery to the demand for power supply.
(4) Grid-connected wind power generation. This power supply method is to connect the wind turbine to the power grid and transmit the electricity from the wind turbine to the power grid. Wind power is integrated into the conventional grid operation to provide power to the larger grid.
(5) Wind / light system. It is also called "wind/light complementary" power generation system, which is a joint power supply system composed of wind turbines and solar cells. In the monsoon climate zone, this system can make full use of wind power and sunshine conditions to generate electricity and provide stable power output throughout the year.
(6) Wind/diesel power supply system. Wind turbines and diesel generators are combined in one system to supply power to the load. Wind power generation is combined with other power generation methods (such as diesel power generation) to supply power to a unit or a village or an island. This is a complementary energy generation method that uses wind power to generate electricity when there is wind and diesel generators to generate electricity when there is no wind.

يمكن أن يوفر هذا النظام كهرباء ثابتة وفي نفس الوقت يحقق الغرض من الاستفادة الكاملة من طاقة الرياح وتوفير الوقود.

9.xMW توربينات الرياح
9.xMW توربينات الرياح

لماذا تعتبر طاقة الرياح أفضل من الطاقة الشمسية

1. انخفاض تكاليف البناء
2- وقت غير محدود لتوليد الطاقة (توليد الطاقة على مدار 24 ساعة في أي وقت)
3. قدرة وحدة كبيرة ، واستخدام موارد عالية ، وتلوث منخفض
4- مناسبة للجزر الساحلية والمناطق الجبلية ومناطق الهضاب حيث المياه والوقود شحيحان والنقل غير ملائم ويمكن تكييفه مع الظروف المحلية

 

كيفية العمل مع Boland / CRRC لبناء مزرعة واحدة لطاقة الرياح 

مشاريع طاقة الرياح في مراحل مختلفة من التعاون

ما قبل المرحلة: توفر Boland / CRRC تقييم موارد الرياح ودعم العمل الأولي ، وإعداد العميل لأعمال الموافقة المسبقة ، و PPA (اتفاقية شراء الطاقة) ، و PDL (رخصة تطوير المشروع) إلخ.

منتصف المدة: بناء محطة توليد الكهرباء ، وتوفير خدمات EPC.

مرحلة متأخرة: التشغيل والصيانة.

عادة ما تتعاقد Boland / CRRC للتعاون في جزء متوسط المدة ، وتحضير أعمال الموافقة المسبقة ، ويمكننا المساعدة في العمل بمعلومات الموافقة المسبقة.

9.xMW توربينات الرياح
9.xMW توربينات الرياح

Boland Renewable Energy Co.,LTD As an integrated new energy power company, providing youwith high quality integrated wind energy , solar energy and energy storage system solutions.Boland is now a subsidiary of CRRC, and is responsible for the overseas expansion of CRRC's wind power & solar power business. We have a relatively complete internal supply chain, service network and excellent product quality and technology.

بولاند توفر محطة توليد الكهرباء EPC والاستثمار والاستحواذ في محطة توليد الكهرباء.

لا تتردد في الاتصال بنا إذا كنت بحاجة إلى أي دعم فني.

بريدي الإلكتروني: marketing@boland-hydroturbine.com

واشنطن: +8613923745989

انقر على صفحة الفيسبوك

انقر فوق موقع الشركة

انتقل إلى أعلى
الاستفسار الآن
Prompt reply, no spam email
يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربةسياسة الخصوصية
ماذا يمكننا أن نفعل لك؟